Nvidia GeForce GTX 1050 / 1050Ti Mining ... - Bitcoin Insider

Advice? Going a bit insane.

I have a simple set-up I've been trying to get running stable for about a week now. I have 2x nVIDIA GTX 980 and 2x Radeon 29 280X cards that I want to use.
I have previously used just the GTX 980s and they were stable for weeks. I recently acquired the 280s, and while I can't be certain, I think the cards are not at issue.
I also had two of the 980s and one 280 running in my desktop stable for quite some time, just as a tester. But for the actual mining rig, I was using old AMD AM3-based hardware. And I've had nothing but problems. Murphy's law.
First, I had a motherboard go out (ASUS M4A87TD EVO.) Luckily I had a spare. But the ASUS board had two native PCI-E x16 slots (one running at x1 speed,) and so I had been running the 980s both in the motherboard, and was using this riser extender to run the other cards, with molex->SATA risers (I don't have enough native 4-pin connectors to run without molex to SATA adapters.)
The "new" board (which is actually chronologically older and older tech) is a Gigabyte GA-MA785GM-US2H. It's also socket AM3 but only supports DDR2 memory; luckily I had old DDR2 available. This board also only has one x16 slot, so I am running 3 GPUs outside of the chassis with x16 risers.
It turns out after some nightmare of troubleshooting that one of the DDR2 DIMMs is probably bad. I don't have a replacement at the moment, but I've tried running everything with one DIMM.
I also have Virtual Memory (swap/page file) set to 16GB. I don't know why this is necessary, but other people mention it and NiceHash wouldn't let me run 4 cards without it.
Anyway, all works "fine;" I have the 280s set to 850MHz core clock and +20 power with 100% fans, and 100% fans and native clock on the 980s.
But I keep getting crashes. Before I had freezes, so I also changed out power supplies several times and tried everything you can think of. I don't think the issue is down to power any more, but I'm open to correction if anyone has a suggestion or tip.
For power, I'm using a 3 to 1 ATX-24 pin adapter, with a SeaSonic 620W as the master, and a Corsair 550W as the "slave." The SeaSonic powers the motherboard and the ATX12V for the CPU. It also powers the 3 SATA to molex adapters for the x16 risers, and the 8+6 pin PCI-E power connectors for the 280s.
The Corsair powers the HDD (this I have also suspected of causing problems but I have swapped HDDs and had the same issues, and I really need to get an SSD for this thing,) two 120mm intake fans, two 140mm exhaust fans, and the 6 pin PCI-E connectors for the 980s.
It doesn't seem to freeze anymore. It will mine just fine for a while but eventually I will get a BSOD, usually saying that the device driver has gone into an infinite loop. I believe this is the Crimson driver (I am using version 15.12.)
I've swapped CPUs and memory and HDDs and motherboards and I'm just almost at my wits' end about to tear my hair out trying to get this thing to run stably. I most likely just need to get all new mainboard/CPU/memory, but I can't do that at the moment, so I am looking for any advice/help I can get.
I would assume the driver is going into an infinite loop because it's polling hardware and not getting the response it expects or something like that, which could indicate a power or heat issue, but I don't know. And I've searched for the BSOD error and 90% of the results for "device driver went into an infinite loop" (paraphrasing) were related to AMD Crimson drivers. So that's been where my suspicion has been so far, and I've had other problems with getting the AMD stuff to work when I was initially setting it up. (And had problems with AMD/ATi drivers going back 20 years, ugh.)
So.. Any advice?
TL;DR: Running 2x GTX 980 and 2x R9 280X; keep getting BSOD about device driver going into an infinite loop after some time mining. Want to stab myself.
submitted by mutilatedrabbit to EtherMining [link] [comments]

Why does it run SO POORLY?

I spent $1400 on this PC two years ago. 1GB overclocked GTX 280, 2.6GHz quad-core Core i7 920, hyperthreading enabled. I can run Crysis on high at 45fps, Far Cry 2 on high at 60fps, I can comfortably mine bitcoins at full capacity while browsing the web...and ARMA 2 gets maybe 20 frames per second, average.
Every. Single. Online community has told me "this game is innovative and its processing has never been seen in any game before". That sounds like bullshit, this PC can run things infinitely more complex and good-looking. And I'm talking 1280x1024, low settings, ARMA 2 isn't even playable. Or OA.
None of the threads helped, not a driver update, disabling AO, PhysX, absolutely nothing. I spent $40 on a game I can't play.
submitted by verisimilarity to arma [link] [comments]

GTX 280 purple snow on bootup, card works without drivers ... Is the GTX 280 Still Relevant In 2019? GTX 260 vs GTX 280 in 2019!? - Battle of The Retro Graphics Cards ep2 $20 GPU Showdown! GTX 280 vs GT 610 (2017) Обзор Asus GTX 280

Die NVIDIA ® GeForce ® RTX 2080 Ti-Grafikkarte ist auf Gaming-Realismus und -Leistung ausgelegt. Die leistungsstarke Grafikprozessorarchitektur NVIDIA ® Turing ™, bahnbrechende Technologie und 11 GB superschneller GDDR6-Speicher der neuesten Generation ergeben den ultimativen Grafikprozessor. Prior to a new title launching, our driver team is working up until the last minute to ensure every performance tweak and bug fix is included for the best gameplay on day-1. Game Ready for Microsoft Flight Simulator This new Game Ready Driver provides the latest performance optimizations, profiles, and bug fixes for Microsoft Flight Simulator. In addition, this release also provides optimal su GTX 1050Ti. Here are some working configurations you can try: Setup #1 MSI GeForce GTX 1050 TI GAMING X 4G Mining Performance. MSI Computer Video Graphic Cards GeForce GTX 1050 TI GAMING X 4G List Price: $210.42 Price: $203.33 You Save: $7.09 Price Disclaimer Stock performance, mining hashrate and power consumption. POWER CONSUMPTION FOR SYSTEM ... EVGA GeForce GTX 280 (01G-P3-1282-AR) (factory overclocked) ... I replaced it and not a single driver crash since then - for two weeks now. korechi. ArmyMP said: THE SOLUTION THAT WORKED FOR ME! I read all until my eyes bled after having same problem as everyone else when I played BF4 Same here. Though in every game I played. I have a GTX 460, Win 7, 64 bit. I've read for months, changed ... Download drivers for NVIDIA products including GeForce graphics cards, nForce motherboards, Quadro workstations, and more. Update your graphics card drivers today.

[index] [10728] [19038] [22794] [7938] [3701] [18520] [3626] [17048] [30100] [15024]

GTX 280 purple snow on bootup, card works without drivers ...

Is the 280 noticeably better than the 260? Lets find out! Category Science & Technology; ... LIAN LI PC - 777 build with Intel QX9770 + SLI GTX 280 - RETRO Hardware - Duration: 19:07. RETRO ... GTX 280 without 8-pin power connector - Duration: 3:07. ShadowUGZ 55,197 views. 3:07. Nvidia GeForce GTX 1060 Review: Faster Than RX 480 and GTX 980? - Duration: 6:18. ... In this video we check out the GTX 280 and see if it can still keep up with today's games. Spoiler Alert..... it cant. #gtx280 #tech #gpu GTX 280 purple snow on bootup, card works without drivers Helpful? Please support me on Patreon: https://www.patreon.com/roelvandepaar With thanks & praise t... GTX 280 vs GT 610 (2017) 3D PC. Loading... Unsubscribe from 3D PC? ... I Bought a $3 2TB USB Drive and Got More Than Just Malware - Duration: 11:18. Jays Tech Vault 316,915 views. 11:18 . GTX 1050 ...

#